Jeep Wrangler 4xe Forum banner

1 - 2 of 2 Posts
2022 Wrangler 4XE Rubicon
Joined
·
14 Posts
Discussion Starter · #1 ·
I have built my dream Jeep over and over for the past 2 years, and tried to find out all of the adjustments and modifications that I would need to run it properly.

We all have to obviously wait on lift scenarios as the added weight is a factor.

I used to look at the version of the Gear Ratio Chart for the Automatic Pentastar 3.6 and found that with JLU Rubicon with 4.1's you could get away with 33's through 36's...

I think Ive scrapped the idea of running 37's after a lot of though as I really don't want to regear, and have decided to go with 35's.

I looked up the gear ratios for considering if I had to regear but only find the 3.8 and 3.6 ICE models listed online.

Does anyone know or have the breakdown for the 2.0L I4 DOHC DI Turbo PHEV Engine, or better yet is there one for the 4XE yet? I wasn't sure if the EV part would effect the numbers or not.

I'd like to see if I will need to regear or be fine with 35's with the 4.1 ratio on the 4XE Rubicon.

Any help or insight is appreciated-
 
1 - 2 of 2 Posts
Top