Jeep Wrangler 4xe Forum banner
1 - 7 of 7 Posts

·
Registered
2022 4xe HA
Joined
·
11 Posts
Discussion Starter · #1 · (Edited)
Anyone who has the Mopar 2" lift kit specifically for the 4XE

Can you please let me know the model number for the Fox shocks (front and rear)? It is physically inscribed on the bottom of the shock.

Looking at the Mopar instructions PDF:

August 24, 2021 Mopar version does NOT specify.
December 1, 2020 version indicates Mopar part # as 68523910AA and 68523916AA.

But I need the Fox #. The reason being I purchased 2 sets of Fox shocks and want to verify specs.

Fox shocks I purchased
986-24-064 (front)
986-24-065 (rear)

Thanks in advance!!
 

Attachments

·
Registered
21 JLURe
Joined
·
90 Posts
Anyone who has the Mopar 2" lift kit specifically for the 4XE

Can you please let me know the model number for the Fox shocks (front and rear)? It is physically inscribed on the bottom of the shock.

Looking at the Mopar instructions PDF:

August 24, 2021 Mopar version does NOT specify.
December 1, 2020 version indicates Mopar part # as 68523910AA and 68523916AA.

But I need the Fox #. The reason being I purchased 2 sets of Fox shocks and want to verify specs.

Fox shocks I purchased
986-24-064 (front)
986-24-065 (rear)

Thanks in advance!!
The Mopar Fox's are 2.5s, not 2.0s. As far as I know non RR 2.5s are not available through Fox.

I'd assume they have the same specs as all the other JL Mopar Fox's, 17.5/19.25 Compressed, 26.25/28.50 Extended (F/R).

Are those the right Fox part numbers? I don't see them on their site.
 

·
Registered
2022 4xe HA
Joined
·
11 Posts
Discussion Starter · #7 ·
According to Fox my shocks have the same travel and extension as the 986-24-135 / 136. Valving might be a little different but I should be fine. Going to give it a go.
 
1 - 7 of 7 Posts
Top