Jeep Wrangler 4xe Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Good evening everyone! I have some Mopar mirrors that require the panels on the hood to be removed so I can install them. The 4XE charging inlet is now on one of those panels. Does anyone know if it’s safe to pop it out and put it back? I tried for almost 30 mins to remove it and had a really hard time. My previous wrangler was not a 4XE and wasn’t difficult at all.
 

·
Registered
Joined
·
82 Posts
I have removed the cowel. Just in bolt it like you would a normal one. It’s not hard, I promise.

You also have to loosen it to mount KC light mounts

I drilled though one of mine being impatient mounting Hauk light mounts that did not work for 5 inch mopar lights. So I had a body shoot fix the hole and paint them satin black like the mopar grill.

1654
 

·
Registered
Joined
·
86 Posts
See if you can take those mirrors back to Mopar. They should have a set for the 4xe that doesn't require modifying the charging port. For about $50 you can also get a set of mirrors that mount to the windshield hinge. Those do clear the charging port and also allow folding the windshield forward.
 
1 - 4 of 4 Posts
Top