Jeep Wrangler 4xe Forum banner

Any way to turn down the volume of alerts to cameras at intersection?

4.9K views 12 replies 6 participants last post by  brnscofrnld  
#1 ·
I think that’s a nice feature to warn drivers of speeding cameras at various intersections. I truly appreciate the warning, but I can’t seem to find a way to adjust its volume? I can turn it off, but I just want the warning to be slightly softer so that it won’t startle me you know? :p
 
Discussion starter · #4 ·
On most vehicles, if you adjust the volume while the alert is triggering, it'll save the volume. I don't know for sure if it'll do it here, and it's a bit difficult to time, but worth a shot.
I will just have to risk my neck going thru that intersection again and again if my timings are off… ;) anyway, will try it out and report back. Thanks for the tip!
 
Discussion starter · #7 ·
I will just have to risk my neck going thru that intersection again and again if my timings are off… ;) anyway, will try it out and report back. Thanks for the tip!
I finally was able to try this out and happy to report that it works!

To make this easier, probably worthwhile to turn on not only the beeping alarm but also the voice warning as well so that you have a longer window to make your volume adjustment.
I even made a U turn back to that intersection to check if the volume was truly lowered… and yep, it remembered!

now I won’t have to be startled by red light cameras! :D
Thanks for the tip CAD!